Avenview DVI-SPLITPRO-4X Spezifikationen PDF herunterladen (Seite 11)

www.avenview.com

Page 8

3. INSTALLATION

To setup Avenview DVI-SPLITPRO-4K follow these steps for connecting to a device:

1. Mount or fix the DVI-SPLITPRO-4K safely

2. Switch off DVI-SPLITPRO-4K and all source devices and displays that will be connected

3. Connect a monitor, projector, other displays that come with DVI / VGA inputs by using 1 male – male DVI cable to DVI-

SPLITPRO-4K DVI output. (you can connect 2 displays equipped with DVI and VGA respectively by DVI – DVI/VGA Y

cable

4. Plug-in DVI to DVI/VGA breakout cable to DVI-Component-VGA and plug in VGA to Component adapter to VGA

connector of the breakout cable

5. Connect a device equipped with DVI output (such as PC) to the DVI connector of the breakout cable

6. Connect a device equipped with the component video output to 3-RCA jack of the Component video adapter

7. Connect a device with VGA output (such as laptop) to VGA connector of DVI-SPLITPRO-4K

8. Connected a device with Composite or S-Video video output to composite input of DVI-SPLITPRO-4K through S-Video

/ Composite Y cable.

9. Connect the USB Cable(s) between DVI-SPLITPRO-4K and computer(s)

10. Connect your computer to DVI-SPLITPRO-4K via RS232 to USB Adapter cable and then install the software

11. Turn ON DVI-SPLITPRO-4K

12. Run the Control Software and establish the connection between PC and DVI-SPLITPRO-4K

13. Turn ON all connected devices and then control the display output thru RS232 and included software

3.1 Installation to Control 1-4 PC’s via USB

1. Follow instructions 1-11 before attempting to control PC control

2. Connect one set of PS/2 compatible Keyboard and Mouse if any control to computer(s) is necessary

3. Connect the USB Cable(s) between DVI-SPLITPRO-4K and computer(s) located on the rear panel

4. Download software PS2 to USB Driver from downloads section.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Keine Kommentare

Avenview DVI-SPLITPRO-4X Spezifikationen Seite 11